Baresque

STRIPE PRINTED SISAL - FOJA

Composition	Printed Sisal on a paper backing
Width	90cm
Roll Length	N/A - Available by the lineal metre
Pattern Repeat	N/A
Installation	Non-reverse hang/butt join. Baresque recommend and supply Roman primer and adhesives for the installation of wallcoverings. Baresque can also recommend wallcovering installers.
ADDITIONAL COMMENTS	Stripe Print - Foja is designed to be tied back with Plain Sisal - Foja.
Fire Rating	In accordance with the Building Code of Australia (BCA) Section C1.10A: Classification: Group 2 Specific Extinction: Less than 250 m2/kg (recorded 13 m²/kg)
Environmental Information	These sisal wallcoverings are dyed with water-based inks and meet the standards of the IGA (International Association of Wallcovering Manufacturers) for content of heavy metal, vinylchloride and formadehyde. The grasses are naturally occurring and renewable resources harvested from farms.
Care Instruction	These wallcoverings should be handled with care, as they are not stain repellent treated. Remove liquid stains immediately using a clean, white, soft, dry cloth tapping on the wallcovering lightly. Use a vacuum cleaner to lightly remove any dust that may have collected. Cleaning with water or detergent is not recommended.