Baresque

FLARE - SOLARIS

Composition	Vinyl face on a non-woven backing
Weight	Equivalent to 18oz (406g/m²)
Width	130cm
Roll Length	30m - Available by the lineal metre
Pattern Repeat	N/A
Installation	Reverse hang alternate drops/overlap & double cut. Baresque recommend and supply Roman primer and adhesives for the installation of wallcoverings. Baresque can also recommend wallcovering installers.
ADDITIONAL COMMENTS	The finish used in Flare is also used in Flowers and Seattle.
Fire Rating	In accordance with the Building Code of Australia (BCA) Section C.10A: Classification: Group 2 Specific Extinction: Less than 250m²/kg (recorded 218m²/kg)
Care Instruction	Always use a clean, white, soft cloth. Use cloth with any of the following in preferred order of use: 1. Clear warm water 2. Mild solution of liquid detergent and warm water 3. Isopropyl Alcohol (a.k.a. rubbing alcohol) Do not use solvent based cleaning agents, lacquer thinners, nail polish remover or cleaning agents containing bleach as these may cause discolouration over a period of time. Remove any detergent with a clean, damp cloth. Gently pat dry. Always test in an inconspicuous area first.

Back to WALLCOVERINGS — COMMERCIAL