Leaves & Shells ‹ Lumicor ‹ Translucent Surfaces

Colours
Gallery
Specifications
Downloads

Texture 2 Lustre 2 Transparency 2

Leaves & Shells

Select a variant

Click on a thumbnail to enlarge

Description / Features: Lumicor is the original embedded panel capturing the beauty of real mateials in high performance resin

Composition: Leaves or shells embedded in acrylic

Sheet Size: 2440mm x 1220mm, 3050mm x 1220mm or 3050mm x 1500mm

Thickness: 3mm, 6mm, 9mm, 12mm or 24mm. Contact Baresque for thickness per design.

Surface Finish: Gloss, Matt, Satin, Diffusion, Sandstone, Adobe, Frost or Moire

Pattern Repeat: N/A

Weight: 1kg / mm / m²

Customisable: Yes. 10 sheet minimum

Indoor / Outdoor: Indoor use only

Wet Areas: Yes. Edges must be sealed

Fabrication: Standard wood working tools. See Baresque Lumicor Handling, Fabrication and Installation guide for more details.

Thermoformable: Yes

Installation: Most glass fittings can be used. See Baresque Lumicor Handling, Fabrication and Installation guide for more details.

Refinishable: Partly refinishable

Additional Comments: 1. Natural products used in Lumicor are seasonal. As such, variations in colour and density may occur between samples and the order. If this detail is critical, a sample of current stock should be produced for final approval which will add up to 3 week to the ordering process. 2. Interlayer can be run horizontally. Contact Baresque for details.

Lead Time: 6-8 weeks

Care Instructions

* Do not use glass cleaning products, acetone, gasoline, benzene, lacquer thinner, chlorinated solvents, gritty abrasive scouring compounds, or alkaline cleaners to clean Lumicor as damage to the sheet will occur

* Use warm water, mild detergent, and a soft sponge, cloth, or chamois to clean Lumicor

* Surface contamination may be cleaned using kerosene, hexane, or aliphatic naphtha, or any acrylic cleaner, such as Novus. Always follow manufacturers recommended use and safety procedures

* Remove any oily residue left behind from solvent cleaning with detergent and water

* Do not use squeegee, scraper, or synthetic rags that may scratch Lumicor

* When cleaning, never scrub Alta. Gently wipe surface with a soft scratch free cloth

REFINISHING

* Light refinishing - if there is only a light scratch, refinishing can be achieved by using rubbing the area in a random circular motion with a fine steel scouring pad (Scotch-brite). Test in an inconspicuous area before attempting a main area on the job.

* Heavy refinishing - contact Baresque for details