Cascade

Colours
Gallery
Specifications
Downloads

Texture 2 Lustre 2 Transparency 2

Cascade

Select a variant

Click on a thumbnail to enlarge

Description / Features: Lucere is a poured acrylic resin which is then used to encapsulate various materials providing a sheet with unparalleled depth and clarity

How to specify: 1. Design / Colour name 2. Sheet size 3. Sheet thickness 4. Surface finish for each side

Composition: Fabric embedded in acrylic

Sheet Size: 2440mm x 1220mm or 2000mm x 1000mm

Thickness: 8mm or 11mm

Surface Finish: Gloss/Gloss, Matt/Matt or Gloss/Matt

Pattern Repeat: N/A

Weight: 8mm - 8kg/m², 11mm - 11kg/m²

Customisable: Yes. 10 sheet minimum

Indoor / Outdoor: Indoor only

Wet Areas: Yes

Fabrication: Standard wood working tools. See Baresque Lucere Handling, Fabrication and Installation guide for more details.

Thermoformable: Yes

Installation: Most glass fittings can be used. See Baresque Lucere Handling, Fabrication and Installation guide for more details.

Refinishable: Fully refinishable to matt or gloss

Additional Comments: 1. Being handmade, slight imperfections in Lucere are deemed acceptable. These slight imperfections may include small bubbles in the interlayer or slight surface texture imperfections. Any imperfection that is not visible one (1) meter away from the panel is deemed within commercial tolerance. 2. Lucere sheets may not be perfectly flat. Due to this, it is always suggested that the sheet be fully framed or mechanically fixed.

Lead Time: 6 weeks (approx) from Wednesday + 1 week for Western Australia. Express delivery is available subject to a surcharge. Contact Baresque for details and pricing.

Care Instructions

* Do not use glass cleaning products, acetone, gasoline, benzene, lacquer thinner, chlorinated solvents, gritty abrasive scouring compounds, or alkaline cleaners to clean Lumicor as damage to the sheet will occur

* Use warm water, mild detergent, and a soft sponge, cloth, or chamois to clean Lumicor

* Surface contamination may be cleaned using kerosene, hexane, or aliphatic naphtha, or any acrylic cleaner, such as Novus. Always follow manufacturers recommended use and safety procedures

* Remove any oily residue left behind from solvent cleaning with detergent and water

Do not use squeegee, scraper, or synthetic rags that may scratch Lumicor

When cleaning, never scrub Alta. Gently wipe surface with a soft scratch free cloth.

REFINISHING

* Light refinishing - if there is only a light scratch, refinishing can be achieved by using rubbing the area in a random circular motion with a fine steel scouring pad (Scotch-brite). Test in an inconspicuous area before attempting a main area on the job.

Heavy refinishing - contact Baresque for details