Illume Graphic Your Name

Colours
Gallery
Specifications
Downloads

Texture 1 Lustre 1 Transparency 1

Illume Graphic Your Name

Select a variant

Click on a thumbnail to enlarge

Description / Features: Illume Graphic utilises the durability of Illume with cutting edge design. A unique fully refinishable resin with a colour layer bonded to the rear, Illume Graphic has an incredible depth, soft touch and range of thicknesses.

How to specify: 1. Save or print out the landscape pattern image from the “Gallery” tab 2. Mark up desired pattern section/s and indicate sizing required (tops are cut from a 2400mm x 1200mm panel) 3. Save or scan and email back to your Baresque contact or info@baresque.com.au 4. Baresque will email back a drawing for sign off 5. Thickness 6. Size 7. Edge Detail

Composition: Lightblocks resin. Supplied as a fully finished table top with a 3mm pencil round edge detail.

Indoor / Outdoor: Indoor use only

Sizes Available: Tops are cut from a 2400mm x 1200mm sheet. Consider the sheet size to deliver the most cost effective table top. Contact Baresque for details.

Thickness Available: 5mm or 12mm

Finishes Available: Matt

Refinishable: Fully refinishable

Lead Time: 4 weeks (approx) + 1 week for Western Australia. Express delivery may be available subject to a surcharge. Contact Baresque for details and pricing.

Additional Comments: This product has been designed more as an “artwork” than a photo. The pixilation in the print adds to the overall effect and is not a product fault.

Care Instructions

* Use warm water, mild detergent, and a soft sponge, cloth, or chamois to clean ILLUME

* Surface contamination may be cleaned using kerosene, hexane, or aliphatic naphtha, or any acrylic cleaner, such as Novus. Always follow manufacturers recommended use and safety procedures.

* Do not use glass cleaning products, acetone, gasoline, benzene, lacquer thinner, chlorinated solvents, gritty abrasive scouring compounds, or alkaline cleaners to clean Illume as damage to the sheet will occur.

* Remove any oily residue left behind from solvent cleaning with detergent and water.

* Do not use squeegee, scraper, or synthetic rags that may scratch Illume.

* When cleaning, never scrub Illume. Gently wipe surface with a soft scratch free cloth

REFINISHING

* Light refinishing - if there is only a light scratch, refinishing can be achieved by using rubbing the area in a random circular motion with a fine steel scouring pad (Scotch-brite). Test in an inconspicuous area before attempting a main area on the job.

* Heavy refinishing - if there is a deep gouge, Illume can be easily refinished using a random orbital sander (Makita 125 or better) and an 80 grit timber working paper. The resin coat is then rubbed into the surface and buffed off using a dry, soft cloth.