Illume Opaque

Colours
Gallery
Specifications
Downloads

Texture 1 Lustre 1 Transparency 1

Illume Opaque

Select a variant

Click on a thumbnail to enlarge

Description / Features: Illume Opaque is a unique range of fully refinishable resin panels with a colour layer bonded to the rear

Composition: Lightblocks resin

Sheet Size: 2400mm x 1200mm

Thickness: 15mm or 25mm

Surface Finish: Matt

Customisable: Yes. 30 sheet minimum.

Indoor / Outdoor: Indoor use only

Wet Areas: Yes

Fabrication: Standard wood-working tools. See Baresque Illume Handling, Fabrication and Installation Guide for more details.

Thermoformable: Limited. Contact Baresque for details.

Installation: Similar to other solid surfaces. Adhered to substrate using either a neutral cure silicone or non-solvent based contact adhesive. DO NOT USE SOLVENT BASED CONTACT ADHESIVES. See Baresque Illume Handling, Fabrication and Installation Guide for more details.

Refinishable: Fully refinishable

Lead Time: 2 weeks (approx) from Wednesday subject to stock availability. + 1 week for Western Australia. Express delivery is available subject to a surcharge. Contact Baresque for details and pricing.

Care Instructions

* Use warm water, mild detergent, and a soft sponge, cloth, or chamois to clean ILLUME

* Surface contamination may be cleaned using kerosene, hexane, or aliphatic naphtha, or any acrylic cleaner, such as Novus. Always follow manufacturers recommended use and safety procedures.

* Do not use glass cleaning products, acetone, gasoline, benzene, lacquer thinner, chlorinated solvents, gritty abrasive scouring compounds, or alkaline cleaners to clean Illume as damage to the sheet will occur.

* Remove any oily residue left behind from solvent cleaning with detergent and water.

* Do not use squeegee, scraper, or synthetic rags that may scratch Illume.

* When cleaning, never scrub Illume. Gently wipe surface with a soft scratch free cloth

REFINISHING

* Light refinishing - if there is only a light scratch, refinishing can be achieved by using rubbing the area in a random circular motion with a fine steel scouring pad (Scotch-brite). Test in an inconspicuous area before attempting a main area on the job.

* Heavy refinishing - if there is a deep gouge, Illume can be easily refinished using a random orbital sander (Makita 125 or better) and an 80 grit timber working paper. The resin coat is then rubbed into the surface and buffed off using a dry, soft cloth.