Lace ‹ Lightblocks Etch Colourbacked

Colours
Gallery
Specifications
Downloads

Texture 3 Lustre 1 Transparency 3

Lace

Click on a thumbnail to enlarge

Description / Features: Designs subtly etched into the Lightblocks Ice surface and then colourbacked

Composition: Lightblocks resin

Sheet Size: 3000mm x 1000mm

Thickness: 6mm, 10mm or 15mm

Surface Finish: Matt

Weight: 6mm - 6kg/m², 10mm - 10kg/m², 15mm - 15kg/m²

Customisable: Yes. 10 sheet minimum

Indoor / Outdoor: Indoor only

Wet Areas: Yes

Fabrication: Standard wood-working tools. See Baresque Lightblocks Handling, Fabrication and Installation guide for more details.

Thermoformable: Yes

Installation: Adhered to wall or split batten. See Baresque Lightblocks Handling, Fabrication and Installation guide for more details.

Refinishable: Fully refinishable

Lead Time: 3 weeks (approx) from Wednesday subject to stock availability. + 1 week for Western Australia. Express delivery is available subject to a surcharge. Contact Baresque for details and pricing.

Care Instructions

* Use warm water, mild detergent, and a soft sponge, cloth, or chamois to clean LIGHTBLOCKS

* Surface contamination may be cleaned using kerosene, hexane, or aliphatic naphtha, or any acrylic cleaner, such as Novus. Always follow manufacturer's recommended use and safety procedures.

* Do not use glass cleaning products, acetone, gasoline, benzene, lacquer thinner, chlorinated solvents, gritty abrasive scouring compounds, or alkaline cleaners to clean Lightblocks as damage to the sheet will occur.

* Remove any oily residue left behind from solvent cleaning with detergent and water.

* Do not use squeegee, scraper, or synthetic rags that may scratch LIGHTBLOCKS.

* When cleaning, never scrub LIGHTBLOCKS. Gently wipe surface with a soft scratch free cloth.

REFINISHING

* Light refinishing - if there is only a light scratch, refinishing can be achieved by using rubbing the area in a random circular motion with a fine steel scouring pad (Scotch-brite). Test in an inconspicuous area before attempting a main area on the job.

* Heavy refinishing - if there is a deep gouge, LIGHTLBOCKS can be easily refinished using a random orbital sander (Makita 125 or better) and an 80 grit timber working paper. The LIGHTBLOCKS resin coat is then rubbed into the surface and buffed off using a dry, soft cloth.