Please Love Me

Colours
Gallery
Specifications
Downloads

Texture 1 Lustre 1 Transparency 1

Please Love Me

Select a variant

Click on a thumbnail to enlarge

Description / Features: Dynamic designs tied back with the durability, refinishability and soft touch of Illume

How to specify: 1. Save or print out the landscape pattern image from the “Gallery” tab 2. Mark up desired pattern section/s and indicate sizing required (panel size is 2400mm x 1200mm) 3. Save or scan and email back to your Baresque contact or info@baresque.com.au 4. Baresque will email back a drawing for sign off

Composition: Lightblocks resin with a bonded backing

Sheet Size: 2400mm x 1200mm

Thickness: 5mm or 12mm

Surface Finish: Matt

Weight: 5mm - 5kg/m², 12mm - 12kg/m²

Customisable: Design section and size are able to be manipulated within the 2400mm x 1200mm panel

Indoor / Outdoor: Indoor only

Wet Areas: Yes

Fabrication: Standard wood-working tools. See Baresque Illume Graphic Handling, Fabrication and Installation Guide for more details.

Thermoformable: No

Installation: Adhered to substrate using either a neutral cure silicone or non-solvent based contact adhesive. DO NOT USE SOLVENT BASED CONTACT ADHESIVES. See Baresque Illume Graphic Handling, Fabrication and Installation Guide for more details.

Refinishable: Fully refinishable

Additional Comments: This product has been designed more as an “artwork” than a photo. The pixilation in the print adds to the overall effect and is not a product fault.

Lead Time: 4 weeks (approx) + 1 week for Western Australia. Express delivery is available subject to a surcharge. Contact Baresque for details and pricing.

Care Instructions

* Use warm water, mild detergent, and a soft sponge, cloth, or chamois to clean ILLUME

* Surface contamination may be cleaned using kerosene, hexane, or aliphatic naphtha, or any acrylic cleaner, such as Novus. Always follow manufacturers recommended use and safety procedures.

* Do not use glass cleaning products, acetone, gasoline, benzene, lacquer thinner, chlorinated solvents, gritty abrasive scouring compounds, or alkaline cleaners to clean Illume as damage to the sheet will occur.

* Remove any oily residue left behind from solvent cleaning with detergent and water.

* Do not use squeegee, scraper, or synthetic rags that may scratch Illume.

* When cleaning, never scrub Illume. Gently wipe surface with a soft scratch free cloth

REFINISHING

* Light refinishing - if there is only a light scratch, refinishing can be achieved by using rubbing the area in a random circular motion with a fine steel scouring pad (Scotch-brite). Test in an inconspicuous area before attempting a main area on the job.

* Heavy refinishing - if there is a deep gouge, Illume can be easily refinished using a random orbital sander (Makita 125 or better) and an 80 grit timber working paper. The resin coat is then rubbed into the surface and buffed off using a dry, soft cloth.